Model Number: RAL-0025 Brand Name: senyida Key Specifications/Special Features: 1. Generalintroduction:Powder coatings aremixed with a certain proportion of the resin, fillers, curingagents and other additives, then prepared by hot extrusion, crushed andsievedProducts are stable at room temperature storage, then baking heat melted and solidified to form smooth and bright permanent coating to achieve thepurpose of decoration and corrosion2. Features:1). Products are nontoxic, solvent-free and nontoxic volatile substances, there are no intoxication, no fire, no three wastes emissions and other pollutionproblems, in full compliance with national environmental laws2). Raw material utilization is high, the highest utilization rate even more than 99%3). After being pre-coated handle, disposable construction, without primer, you can get a sufficient thickness of the coating, easy to automate operation, highproduction efficiency, reduce costs4). Dense coating adhesion, good impact strength and toughness, high
coverage corners, with excellent resistance to chemical corrosion and electricalinsulation properties
5). Powder coatings storage and transport are safety and convenience
3. Productseries:
Productsincludehighlight(above86%), glazed(76-85%), matte (20-50%), lowlight (below20%)
We alsooffer variety of shinyproductsaccordingtotheneedsofusers
4. Powderphysicalproperties:
Proportion: 1.2-1.8(dependingonthecolorandgloss)
Particlesizedistribution: 100%less than125 microns(more than85% between60 to 90)
Liquidity (180°C): 22-35mm
Curingconditions: 200°C, 10minutes
5. Averagecoverage:
8-10m/kg, themembraneis60μm (calculate by100% utilizationrate of powder coating)
6. Packing:
Cartonpacking, linedwithdoublepolyethylenebag, netweight20kg
7. Storagerequirements:
Storebelow30°C, ventilated, dry, cleanroom, notnearthefire, heat, directsunlight, opendumpsisprohibited